Compliant with PCI Express 1.1
Meet the Requirements of the ISO 11898-1
CAN bus 2.0B backward compatible with 2.0A
Support baud rate 10/20/50/100/250/500/800/1000K
Support CAN message acceptance filter
Support Linux SocketCAN
Compliant with IEC 60950-1:2005 + A1: 2009 + A2:2013 2.5kV HiPOT protection
Compliant with EN61000-4-2 (ESD) Air-15kV, Contact-8kV
Termination resistor enabled/disabled by switch
30μ” golden finger, 3-year warranty
Industrial Temperature (-40°C to +85°C) support
Industrial design, manufactured in Innodisk Taiwan

Intel i210 chip. Single GbE LAN ports
Complies with EN61000-4-2 (ESD) Air-15kV, Contact-8kV
Transformer on PCB for flexible cable design
External LED indicator pin for speed 10/100/1000
Optional Industrial Temperature (-40°C to +85°C) support
30μ” golden finger, 3-year warranty
Industrial design, manufactured in innodisk Taiwan

Intel i210 chip. Dual GbE LAN ports
Complies with EN61000-4-2 (ESD) Air-15kV, Contact-8kV
Transformer on PCB for flexible cable design
External LED indicator pin for speed 10/100/1000
Optional Industrial Temperature (-40°C to +85°C) support
30μ” golden finger, 3-year warranty
Industrial design, manufactured in innodisk Taiwan

Product Features
Alternative M.2 2260 or 2280 B-M key
CANbus 2.0B backward compatible with 2.0A
Supports baud rate 100/125/250/500(default)/800/1000K
Supports CAN message acceptance filter
Keeps configuration after hardware reboot
Up to 6000 CAN messages per second (receive data)
Supports Listen-only mode
Additional driver to support Linux SocketCAN
Supports SAE J1939 high layer protocol (Optional)
Termination resistor enabled/disabled by jumper
Complies with EN61000-4-5 2.5kV surge protection
Complies with IEC 60950-1:2005 + A1: 2009 + A2:2013 2.5kV HiPOT protection
Complies with EN61000-4-2 (ESD) Air-15kV, Contact-8kV
30μ” golden finger, 3-year warranty
Supports -40 to +85 degrees
Industrial design, manufactured in Innodisk Taiwan

Compliant with PCI Express 1.1
Meet the Requirements of the ISO 11898-1
CAN bus 2.0B backward compatible with 2.0A
Support baud rate 10/20/50/100/250/500/800/1000K
Support CAN message acceptance filter
Support Linux SocketCAN
Compliant with IEC 60950-1:2005 + A1: 2009 + A2:2013 2.5kV HiPOT protection
Compliant with EN61000-4-2 (ESD) Air-15kV, Contact-8kV
Termination resistor enabled/disabled by switch
30μ” golden finger, 3-year warranty
Industrial Temperature (-40°C to +85°C) support
Industrial design, manufactured in Innodisk Taiwan

PCI-Express specification Rev. 2.0 compliant
4800 to 921.6Kbps serial data rate. 256-byte FIFOs
Full RS232 functions with DB9 connector
Support port-to-computer isolation, complies with IEC 60950-1:2005 + A1: 2009 + A2:2013 2.5kV HiPOT protection
Complies with EN61000-4-2 (ESD) Air-15kV, Contact-8kV
Industrial temperature(-40 ºC to 85 ºC) operation
30μ ” golden finger, 3 years warranty

Support M.2 2230/2242 B key form factor
Compliant with PCI Express Base Specification
Compliant with Universal Serial Bus 2.0 Specification
Compliant with SATA III Specification
Optional NANO SIM slot on the back side
Industrial temperature -40 ºC to 85 ºC
30μ” golden finger, 3-year warranty
Industrial design, manufactured in innodisk Taiwan

Supports low profile/standard PCIe form factor
Supports external SATA II and USB 2.0 signal to mPCIe & M.2 2242/2260 (Front side)
Supp
30μ" golden finger, 3 years warranty
Industrial design. Manufactured in Innodisk Taiwan

Compliant with PCI Express Base Specification
Compliant with Universal Serial Bus 2.0 Specification
Supports M.2 A-E key wireless module such as 3G, 4G, WLAN, WWAN, Bluetooth
Supports M.2 2230/2242 form factor
Supports M.2 PCIe Lane 0 & Lane 1 by pin header setting
Industrial temperature -40 ºC to 85 ºC

PCI-Express specification Rev. 2.0 compliant
PCIe x1 to mPCIe pass-through design
3 years warranty
Industrial design. Manufactured in innodisk Taiwan

Supports low profile/standard PCIe form factor
Supports external SATA II and USB 2.0 signal to mPCIe & M.2 2242/2260 (Front Side)
PCIe to mPCIe pass-through design (BackSide)
30μ" golden finger, 3 years warranty
Industrial design. Manufactured in Innodisk Taiwan

Supports low profile/standard PCIe form factor
Supports external SATA II and USB 2.0 signal to mPCIe & M.2 2242/2260 (Front side)
Supp
30μ” golden finger, 3 years warranty
Industrial design. Manufactured in innodisk Taiwan

PCIe to four SATA III ports supported
Auto switch between SATA port #4 & mSATA
Supports AHCI, Port-Multiplier.
Supports Native Command Queuing.
Supports error reporting, recovery and correction.
Pin header for LED connection.
30μ" golden finger, 3 years warranty.
Industrial design, manufactured in innodisk Taiwan

PCI Express 2.0 to 4 x USB ports with SuperSpeed (5Gbps) data rate.
Independent 1.5A overcurrent protection (OCP) for each port.
Compliant with xHCI 1.0, USB 3.0 Rev 1.0.
Two USB p
Two USB p
Supports USB Battery Charging Specification Revision 1.2.
Optional Industrial Temperature (-40°C to +85°C) support.
30μ golden finger, 3 years warranty.
Industrial design, manufactured in innodisk Taiwan

PCI Express 2.0 to four SATA III ports
Supports AHCI, Port-Multiplier
Supports Native Command Queuing
Supports error reporting, recovery and correction
30μ" golden finger, 3 years warranty
Industrial design, manufactured in Innodisk Taiwan

mPCIe to four SATA III ports
Supports AHCI, Port-Multiplier
Supports Native Command Queuing
Supports error reporting, recovery and correction
30μ" golden finger, 3 years warranty
Industrial design, manufactured in Innodisk Taiwan

PCIe x 4 to dual M.2 ports
Supports M.2 Key-B 2242/2260/2280/22110
Supports AHCI, Port-Multiplier
Supports Native Command Queuing
Supports wide temp
30μ" golden finger, 3 years warranty
Industrial design, manufactured in Innodisk Taiwan

Compliant with PCI Express Base Specification Revision 2.0
Compliant with Universal Serial Bus 3.0 Specification Revision 1.0
Supports 2 downstream USB 3.0 ports
Complies with EN61000-4-2 (ESD) Air-15kV, Contact-8kV
30μ" golden finger, 3 years warranty.
Industrial design, manufactured in innodisk Taiwan

mPCIe to dual SATA III ports
Low power consumption
Supports AHCI, Port-Multiplier
Supports Native Command Queuing
30μ" golden finger, 3 years warranty
Industrial design, manufactured in Innodisk Taiwan

Support display output of HDMI 1.4 or DVI-D, single/dual 24bit LVDS channel
Single HDMI display resolution up to 4K UHD (3840x2160@30p)
Single DVI-D display resolution up to FHD (1920x1080@60p)
Dual LVDS display resolution up to FHD (1920x1080@60p)
Built-in 256MB DDR3 memory.
Industrial temperature -40ºC to 85ºC
30μ” golden finger, 3-year warranty